# Base Belts

## S-Wall™ Sidewall Belts

The following range of cross-stabilised base belts has been manufactured in conjunction with PHOENIX. Please enquire as to the suitability of any given belt for the application for which you intend to use the belt. Alternatively, allow us to calculate the belt for you.

 Type ‘XE’ This belt incorporates the cross-stabilising ply in the tensioning ply, mainly used for medium duty applications. Type ‘XE+2’ The cross-stabilising ply and tensioning plies are separate, in this case the belt has 2 cross-stabilising plies, application areas are medium to heavy. Type ‘XE-SC+2’ This belt incorporates textile tensioning plies with Steelcord cross-stabilising members. The high lateral stiffness means the belt can be used in application areas where rigidity is an important factor, i.e. high lift heights and wide belts. Type ‘XST-SC’ This belt incorporates Steelcord tensioning with Steelcord cross-stabilising members. High tensile strengths can be achieved making the belt ideal for high vertical lift applications.

Base Belt Type Strength in N/mm Cover Thickness in mm Overall Thickness Weight in kg/m² Min. Pulley Diam. in mm
Type ‘XE’
250 / 2 2:2 8.0 9.40 200
400 / 3 4:2 10.0 13.50 315
Type ‘XE+2’
400 / 3+2 4:2 10.70 12.00 315
500 / 3+2 4:2 11.30 12.70 400
630 / 4+2 4:2 12.50 14.20 500
800 / 5+2 4:2 13.60 15.70 630
1000 / 5+2 4:2 19.90 16.90 800
1250 / 5+2 4:2 15.50 18.20 1000
Type ‘XE-SC+2’
315 / 2+2 4:2 10.50 15.00 315
400 / 3+2 4:2 11.10 15.85 315
500 / 3+2 4:2 11.70 16.90 400
630 / 4+2 4:2 12.90 18.00 500
800 / 5+2 4:2 14.10 19.50 630
1000 / 5+2 4:2 15.30 19.50 800
1250 / 5+2 4:2 16.00 22.00 1000
Type ‘XST-SC’
1600 8:8 21.60 33.60 1250
2000 8:8 21.60 34.90 1250
2500 8:8 23.30 39.00 1400
3150 8:8 24.00 41.90 1400
4000 8:8 25.20 47.10 1600
4500 8:8 25.70 48.10 1600

### Belt Composition:

X = Cross-Stabilised construction
E = Polyester Tension Plies
+2 = Number of Separate Cross-Stabilising Plies
SC = Steel Cord Cross-Stabilised
XST-SC = Steel Cord

Overall belt weight will be decided by the final belt design which is dependent on the application.

Cover Thickness: Above are standard constructions, belts can be supplied with non-standard covers to special order.
Belt Strength: Above are standard items, others available to special order.

### Note:

Pulley diameters shown are for normal quality, and standard cover thickness. Please enquire for recommended diameters on belts with special quality covers or different tensile ratings as these may require larger diameters.