Steel Cord Conveyor Belts

Guide Values for the Mass and Thickness

Phoenix steel cord conveyor belts for general material handling purposes with covers of type X

Belt Cover gauge dDp in mm Belt thickness
dG in mm
Area related belt mass with cover type m"G in kg/m2 with cover type
Top side : Bottom side X
St 400 4 : 4 10.5 13.0
St 500 4 : 4 10.5 14.0
St 630 6 : 4 13.5 17.5
St 800 6 : 4 13.5 18.0
St 1000 6 : 4 14.0 19.5
St 1250 6 : 4 14.0 21.5
St 1600 8 : 6 19.5 28.0
St 1800 8 : 6 19.5 28.5
St 2000 8 : 6 19.5 29.0
St 2500 10 : 8 25.0 38.5
St 3150 10 : 8 26.0 41.0
St 3500 10 : 8 26.5 42.5
St 4000 12 : 8  29.0 48.0
St 4500 12 : 8  29.5 50.5
St 5000 12 : 10 32.0 55.0
St 5400 12 : 10 32.5 56.0
St 6300 12 : 10 34.0 66.0
St 7500 12 : 10 35.0 69.0
St 8500 14 : 10 37.5 73.0
Data on the size parameter m"G apply only for the cover gauges as listed providing the range of tolerances: +1.2/−0.6 kg/m²

More Information about PHOENOCORD® Steel Cord Conveyor Belt

Phoenix Steel Cord Conveyor Belts with Textile Transverse Reinforcement (T) in Self-Extinguishing Version (V) for Underground Coal Mining

Belt Cover gauge dDp in mm Belt thickness
dG in mm
Area related belt mass m"G in kg/m2
Top side : Bottom side
St 1000 10T : 6T 20.0 35.0
St 1250 10T : 6T 21.0 37.5
St 1600 10T : 6T 22.0 40.5
St 2000 10T : 8T 24.0 45.0
St 2500 10T : 8T 25.0 49.0
St 3150 10T : 8T 26.0 52.0
St 3500 10T : 8T 27.0 55.0
St 4000 12T : 8T 29.0 60.0
St 4500 12T : 8T 30.0 63.0
St 5000 12T : 8T 31.0 68.0
St 5400 12T : 8T 31.0 69.5
St 6300 12T : 10T 34.0 78.0
St 7500 14T : 10T 37.0 83.0
St 8500 14T : 12T 39.5 86.0
Data on the size parameter m"G apply only for the cover gauges as listed providing the range of tolerances: +1.5/−0.8 kg/m²

Explanation for the tabular sections

Area related belt mass m"G

With other cover gauges, the following deviations per mm cover result:

Cover type X 1.10 kg/m2
Cover type Y 1.15 kg/m2
Cover type V 1.50 kg/m2

From the area related mass of the conveyor belt m"G the length related mass m’G can be calculated, taking into account belt width B in m according to the following equation:

m’G = B · m"G

Belt thickness dG

The data on belt thickness dG only apply for the cover gauges as listed above with a tolerance range of + 1.0/-0.5 mm for all tabular sections.

The thickness of the belt carcass dGk can be calculated, taking the total cover gauge of top and bottom sides dDpges according to the following equation:

dGk = dG - dDpges
Steel Cord Conveyor Belts – Phoenix Conveyor Belt

PHOENOCORD® Steel Cord Conveyor Belt