Sidewalls

S-Wall™ Sidewall Belts

Sidewalls S-Wall™

S-Wall™ corrugated Sidewalls represent the latest state-of-the-art design ideas and manufacturing techniques. The Sidewall design ensures maximum flexing without fatigue, the profile has excellent vertical stability for load retention and return side support. The design allows for high compression to ensure smooth inner deflection around small radii. Another important design feature is that the Sidewalls can be pressed from both sides when mounting. This offers much higher bond strengths and security.

The fabric insertion is of the diagonal type which gives excellent tear resistance and also allows the Sidewall to flex more easily.

The rubber compounds used have been tested to ensure maximum flexibility along with high abrasion resistance and high tensile strength.

The ‘in-house’ test conveyor designed and built specifically to test the new range of S-Wall™ Sidewalls has proven the design and rubber compounds work together in harmony increasing the life of the Sidewall and ensuring maximum durability.

S-Wall™ Sidewalls are available in four basic product groups as shown below. If purchased as loose profiles the Sidewalls are packed into non-returnable containers. There is not normally any minimum order quantity, however, for special qualities please check before ordering.

Sidewall Types

Sidewalls S-Wall™
Type S

Standard Construction in heights from 40mm to 120mm.

Type SR

Standard construction but with Diagonal Fabric Reinforcement.

Type HDSR

Heavy duty construction including fabric reinforcement as standard in heights from 120mm to 300mm.The fabric reinforcement is of the diagonal type ensuring maximum flexibility with high vertical stability. If required these can be supplied without fabric reinforcement to special order, Ref: HDS.

Type XHDSR

Heavy duty Special design including fabric reinforcement as standard in heights from 300mm to 630mm.


Rubber Qualities

  • High Abrasion Resistant
  • Oil and Fat Resistant
  • Heat Resistant to 100°C
  • High Heat Resistant to 150°C
  • Flame Retardant

Other qualities may be available to special order, please enquire.


Type H Sw Tw P Min. Pulley Diam.
in mm
Weight
in kg/m
  40 35 30 30 125 0.60
  60 50 45 40 160 1.56
S* 80 50 45 40 200 1.80
  100 50 45 40 250 2.23
  120 50 45 40 315 2.67
  120 75 70 60 400 4.01
  160 75 70 60 400 4.77
  200 75 70 60 500 6.48
HDS** 250 75 70 60 630 7.55
  280 75 70 60 700 8.60
  300 75 70 60 750 9.30
XHDS*** 300 100 90 75 800 12.50
  400 100 90 75 1000 18.75

* Denotes available with or without fabric reinforcement.
** Available only with fabric reinforcement.
*** Denotes standard abrasion resistant grade.