Cleats

S-Wall™ Sidewall Belts

All S-Wall™ Cleats have been specifically designed to give optimum performance. The shape of the ‘C’ and ‘TC’ types has been created to offer best conveying capacities along with excellent self-cleaning properties. S-Wall™ cleats for the smaller profiles are of the extruded type. All larger cleats are moulded to give the best shape retention even when conveying high-density materials. Cleats are available in either 2.5m for moulded and 4.5m / 5m lengths for extruded profiles. Cleat profiles are shipped in non-returnable packing cartons.


Cleat Types Height in mm Base Width in mm Weight in kg/m Min. Pulley Diam. in mm Production Length in m
Type 'C'
35 70 0.50 125 5
55 90 1.50 160 5
75 90 2.00 200 5
90 110 2.30 250 2.25
110 110 2.50 315 4.5
Type 'TC'
75 80 1.80 200 1.75
90 110 2.50 250 4.5
110 110 2.80 315 2.75
140 160 6.50 400 2.5
180 160 8.25 500 2.5
230 175 10.50 630 2.5
260 11.50
280 12.75
Type 'TC-MB‘

Separate moulded base, cleat blade can be of rubber or PU and can be of any height.
140 160 9.25 400 2.5
180 160 10.50 500 2.5
230 160 12.25 630 2.5
250 160 13.00 630 2.5
280 160 13.50 800 2.5
Type 'TC-XS‘

The cleat base is 2 piece moulded section and the blade is bolted into position.
280 225 18.25 800 2.5
360 230 22.50 1000 2.5
Type 'TK‚

Used as a drag-out cleats.
35 110 1.65 160 5
40 110 200 5
Type 'T'
20 40 0.28 100 5
25 40 0.3 100 5
35 70 0.55 100 5
40 70 0.60 125 5
55 80 1.45 160 5
75 100 1.80 200 5
90 110 2.50 250 4.5
110 110 2.80 315 4.5
140 160 6.60 400 2.5
180 160 8.30 500 2.5
230 175 10.46 630 2.5
Type 'T-MB‘

Separate moulded base, cleat blade can be of rubber or PU and can be of any height.
110 160 7.90 315 2.5
140 160 9.25 400 2.5
180 160 11.50 500 2.5
230 160 13.50 630 2.5
250 160 14.60 630 2.5
280 160 17.65 800 2.5
Type 'T-XS‘

The cleat base is a moulded section and the blade is bolted into position.
280 230 19.50 800 2.5
360 230 22.50 1000 2.5
Cleats S-Wall™

The above are standard heights, non-standard are available, please enquire.


Side Blinkers

Side Blinkers can be fitted in-between the cross cleats profile and the Sidewall to make a seal. Side Blinkers are used when the material is particularly free flowing.


Ancillary Equipment for S-Wall™ Cleat Profiles

Screw Reinforcement sets are available in a selection of sizes to suit specific Cleat designs as follows.

Type Cleat Heights in mm
Type 1 75
Type 2 90 to 110
Type 3 110
Type 4 140 to 180
Type 5 230
Type 6 260 to 280
Type 7 280 to 360